Product Overview
Signal Repeater Kit for Cars/Vehicles - Boosts Voice/SMS 3G/4G Data (800MHz / 900MHz) SD-VA
The DriveBoost, is a Mobile Phone Signal Booster for all networks in Ireland, EU and rest of the the world, that can be installed in Cars, Trucks, Boats, Yachts and other vehicles. This remarkable device amplifies GSM (Voice) and 3G data signal at 900MHz.
The high-gain external antenna that comes with this device is magnet mounted to your car roof and collects any available GSM & 3G signal. Several mobile network operators also transmit 3G data at 900MHz. Therefore, this device can amplify the signal for GSM 900Mhz and 3G 900MHz, both at the same time. Provided that there is 3G 900MHz signal in your area.
Amplified signal is fed down the cable to the signal booster unit placed under the front seat of the vehicle. From there, the signal is boosted.
A cable then feeds this amplified signal to the car phone holder, that is suction mounted to your dash/windscreen, and the signal is transmitted to your phone.
This car mobile signal booster is powered by 12-volts power supply using your car's cigarette lighter port.
Overview on how you would install the signal repeater kit in a car or any type of vehicle.
Notable Features
- All components needed for installation in one package
- CE Certified and RoHS compliant
- Legal to Use in the Republic of Ireland, ComReg Approved
- Easy To Install
- Complete operator network protection
- Compatible with all Irish, UK, European Mobile Phone Operators
Package Contents
Reference Image: Package Content of the Car Kit
The Booster Kit Includes:
- One magnet mounted omnidirectional antenna
- One SD-VA-* signal repeater device (depends on which model you choose)
- One 12v Power plug
- One car phone holder
SD-VA-G Technical Specification
| Frequency Specification | |
|---|---|
| Frequency Band | 880-960MHz |
| Coverage | Direct Connect |
| Number of User | 1 (Direct Connect) |
| Gain | Uplink Gp > 26dB Downlink Gp > 25dB |
| Pass Band Ripple | < 4dB |
| I/O Impedance | 50 ohm/N Connector |
| Max Signal Strength | 24dBm Uplink 25dBm Downlink |
| Ambient Temperature | -30°C to +70°C |
| Power Supply Input | 110 – 240V AC |
| Power Supply Output | 12V DC |
| Level Control | Automatic |
| Oscillation Control | Automatic |
| AGC | Yes |
| Antenna Specification: Outdoor Antenna | |
| Nominal Gain | 2dBi |
| 3dB Beam Pattern | Omni |
| Bandwidth | 800-2500MHz |
| VSWR | <1.4 |
| Polarization | Vertical |
| Power Rating | 50W |
| Impedance | 50 Ohm |
| Termination | SMA Male |
| Cross Pol. Discrimination | -20dB |
| Dimensions | 10cm |
| Weight | 0.68Kg |
| Rated Wind Velocity | 160Km/Hr |
| Working Temperature | -40°C to +65°C |
| Power Supply Specification | |
| AC Input | 12V 0.5A 50-60Hz (car cigarette socket) |
| Typical Power Usage | 6W |
| Mechanical Specification | |
| Length | 16cm |
| Width | 15cm |
| Depth | 3.5cm |
| Weight | 0.6kg |
| Mounting | 4 x 5mm mounting holes |
SD-VA-LG Technical Specification
| Frequency Specifications | |
| Frequency Bands | (791 - 862MHz) + (880-960MHz) |
| Coverage | Direct Connect |
| Number of People | 1 (Direct Connect) |
| Gain | Uplink Gp > 25dB Downlink Gp> 25dB |
| Pass Band Ripple | < 4dB |
| I/O Impedance | 50 ohm/N connector |
| Max Signal Strength | 24dBm Uplink / -25dBm Downlink |
| Ambient Temperature | -30°C to +70°C |
| Power Supply Input | 110 - 240V AC |
| Power Supply Output | 12V DC |
| Level Control | Automatic |
| Oscillation Control | Automatic |
| AGC | Yes |
| Antenna Specifications (indoor/outdoor) | |
| Nominal Gain | |
| 3dB beam Pattern | Omni |
| Bandwidth | 800-2500MHz |
| VSWR | <1.4 |
| Polarization | Vertical |
| Power Rating | 50W |
| Impedance | 50-OHM |
| Termination | SMA Male |
| Cross Pol. Discrimination | -20dB |
| Dimensions | 10cm |
| Weight | 0.68kg |
| Rated Wind Velocity | 160km/hr |
| Working Temperature | -40°C to +65°C |
| Power Supply Specification | |
| AC Input | 12V 0.5A 50-60Hz (car cigarette socket) |
| Typical Power Usage | 6W |
| Mechanical Specification | |
| Length | 16cm |
| Width | 15cm |
| Depth | 3.5cm |
| Weight | 0.6kg |
| Mounting | 4 x 5mm holes for mounting |
| Note: Specifications subject to change without prior notice. | |