Product Overview
Signal Repeater Kit for Voice Calls / SMS - RP-G-4P (GSM 900MHz) SD-RP1002-G-4P
The SD-RP1002-G-4P signal repeater is a remarkable device that is perfect in enhancing signal reception of your cellular devices. It works well in boosting voice calls & sms signal in your mobile devices, while your inside a highly-insulated buildings with thick concrete or dry walls and other construction materials that blocks cellular signal from getting in.
It's a must-have device for businesses that requires mobile calls to operate and run their day-to-day business operation, but cellular signal outside your building won't event penetrate your basement, roofs, and walls. Get one today and eradicate your weak signal issue inside your building. Enjoy a drop-call-free voice calls in no time!
For More Information: https://www.dropbox.com/s/rlphpktmtd4azn5/SD-RP1002-G-4P.pdf?dl=0
Repeater Features
- Provides GSM (Voice & SMS) signal at 900Mhz for your large building
- Coverage: 4000m2 (up to 15 rooms)
- Compatible with all Irish & European mobile operators
- Unlimited number of calls / data sessions at the same time
- CE certified
- Signal power and diagnostics indicator
- Designed & Manufactured in Ireland
- Complete operator network protection
- Works with all known Irish mobile operators
- ComReg Approved and Legal to Use in Ireland
- 3-year Warranty
Technical Specfication
You cann read further below to know more about SD-RP1002-G-4P's technical specification.
| Frequency Specifications | ||
|---|---|---|
| Frequency Bands (MHz) | 880 – 960MHz | |
| Coverage | (1000m2 per antenna X 4) = ~15 rooms | |
| Number of People | Unlimited | |
| Gain | Uplink Gp > 50 Downlink Gp > 60dB |
|
| Pass Band Ripple | < 4dB | |
| I/O Impedance | 50 ohm/SMA Female Connector | |
| Max Uplink/Downlink Signal Strength | 17dBm / 10dBm | |
| Ambient Temperature | -30°C to +70°C | |
| Power Supply Input | 110 - 240V AC | |
| Power Supply Output | 12v DC | |
| Oscillation Control | Automatic | |
| Level Control | Automatic (Automatically adjusts during installation. Thereafter, automatically adjusts for seasonal variation in pathloss between Basestation and Outdoor Antenna) |
|
| Uplink Switch Off | Yes (The uplink amplifiers switch off when the repeater is not in use, thus reducing the uplink noise to almost zero. When the repeater is in use (eg phone call being made), the uplink amplifier switches on for the duration of the call and a blue LED switches on indicating this is the case) |
|
| AGC Range | 30dB | |
| Surge Protection | SMA Connectors DC Grounded, 12V DC Port MOV Protected | |
| Antenna Specifications | ||
| Indoor Antenna | Outdoor Antenna | |
| Nominal Gain | 6.4dBi / 9.4dBi | 10dBi |
| 3dB beam Pattern | 60ºC x 60ºC | 60ºC x 50ºC |
| Bandwidth | 790-960MHz + 1710-2700MHz | 790-960MHz + 1710-2700MHz |
| VSWR | <1.4 | <1.5 |
| Front to Back Ratio | > 20dB | > 20dB |
| Polarization | Vertical | Vertical |
| Power Rating | 50W | 50W |
| Impedance | 50-OHM | 50-OHM |
| Termination | SMA Male | N-Female |
| Cross Pol. Discrimination | -20dB | -20dB |
| Dimensions | 210 x 180 x 43mm | 442 x 205 x 62mm |
| Weight | 0.68kg | 1.2kg |
| Wind Velocity | 126km/hr | 140km/hr |
| Working Temperature | -40ºC to +65ºC | -40ºC to +65ºC |
| Power Supply Specification | ||
| AC | 100-240V, 50-60Hz | |
| DC Input | 12v, 0.7A | |
| Typical Power Usage | 15W | |
| Mechanical Specification | ||
| Length | 16cm | |
| Width | 15cm | |
| Depth | 3.5cm | |
| Weight | 0.6kg | |
| Mounting | 6 x 5mm holes for mounting | |
| Note: Specifications subject to change without notice. | ||