Signal Repeater Kit for Voice, 3G & 4G LTE - SD-BIG-LG Booster for Outdoors (800MHz / 900MHz / 2100MHz) SD-BIG-LG

(No reviews yet) Write a Review

Log in for pricing

Shipping:
Calculated at Checkout

Product Overview

Signal Repeater Kit for Voice, 3G & 4G LTE - SD-BIG-LG Booster for Outdoors (800MHz / 900MHz / 2100MHz) SD-BIG-LG

The SD-BIG-LG Signal Booster can be used to improve your signal reception for GSM Voice Call, 3G-2100MHz and 4G LTE 1800MHz frequency bands. It works on all major Irish Mobile Operators like; Three, Meteor, Vodafone, Tesco, EIR and all operators in Europe, and the rest of the world. It is ComReg approved, and this means that - it is safe and legal-to-use it in Ireland. It won't cause any signal interference with mobile network towers/mast.

This remarkable device is perfect for large installation, where you'd want to cover a huge outdoor area, like a small community/town in a valley, quarry, open-pit mines, or wide underground spaces like tunnels and the like.

NOTE: The SD-BIG-LG BigBoost must be used with the StellaDoradus Triple-Band Repeater System. Please don't hesitate to contact us if you have enquiries or clarifications regarding this product.

Reference Image: Installation Overview for the SD-BIG-LG LTE and Voice Call Signal RepeaterReference Image: StellaDoradus SD-BIG-LG  Repeater Installation Overview - Showing how the repeater system were set up to cover a large open area.

Technical Specification

The SD-BIG-LG is an outstanding device that can boost signal in large outdoor areas. It is designed and made for voice call, 3G and 4G LTE-800MHz frequency bands.

Please read below for full technical specifications of this signal booster.

* Automatically adjusts during installation. Thereafter, automatically adjusts for seasonal variation in pathloss between Base station and Outdoor Antenna.

** The uplink amplifiers switch off when the repeater is not in use, thus reducing the uplink noise to almost zero. When the repeater is in use (eg phone call being made), the uplink amplifier switches on for the duration of the call and a blue LED switches on indicating this is the case.

Note: Specifications subject to change without notice.


Repeater Specification
Frequency Bands (Mhz) (791 - 862MHz) + (880-960MHz)
Range (depends on received signal) ~3Km
Number of People unlimited
Gain Uplink Gp > 20dB
Downlink Gp> 20dB
Pass Band Riple < 4dB
I/O Impedance 50 ohm/N connector
Max uplink/downlink signal strength 0dBm / 18dBm
Ambient Temperature -30 o C to +70 o C
Power Supply Input 110 - 240V AC
Power Supply Output 12v DC
Oscillation Control Automatic
Level Control Automatic*
Uplink Switch Off Yes**
AGC Range 30db
Surge Protection SMA connectors DC grounded, 12V DC port MOV protected
Antenna Specification: Indoor / Outdoor Antenna
Nominal Gain 6.4dBi / 9.4dBi
3dB Beam Pattern 60° x 60°
Bandwidth 790-960MHz + 1710-2700MHz
VSWR <1.4
Front to Back Ratio > 20dB
Polarization Vertical
Power Rating 50W
Impedance 50-OHM
Termination SMA Male
Cross Pol. Discrimination -20dB
Dimensions 210 x 180 x 43mm
Weight 0.68kg
Wind Velocity 126km/hr
Working Temperature -40 o C to +65 o C
Power Supply Specification
AC 100-240V, 50-60Hz
DC 12V, 1A
Typical Power Usage 12W
Mechanical Specification
Length 32cm
Width 19cm
Depth 23.5cm
Weight 1Kg
Mounting 4 x 5mm holes for mounting

Reviews

(No reviews yet) Write a Review