You can use SD-RP1002-D signal repeater kit to amplify your 4G LTE signal inside your house or small office.

It can also be used in small to medium offices, halls and function rooms. You need at least 1 signal bar outside your home/office in order for this device to function properly. This device will take the weak signal from outside, then takes it in, and pass it through the booster device, then re-transmits the boosted and filtered signal to your target area. More than one device/cellphone can be boosted in the target area. So you can enjoy stellar signal quality with your friends and family. Get one today and we'll dispatch the following day.

Notable Features

• Provides 4G LTE 1800Mhz
• Legal to Use in Ireland, UK and EU
• Boosts All Networks (i.e. Vodafone, Meteor/EIR, Three)
• Comes As Kit - Everything included for complete installation
• Up To 4-Rooms Coverage Area
• No Sim card required, no extra bills

How It Works?

The SD-RP1002-D is ideal for providing strong 4G/LTE signal coverage in your home or small office. As long as there is signal outside your house/office, this device can amplify the signal and re-transmit the signal throughout your house or any target area. It can cover around 4 rooms. For the repeater to work you must have at least 1 bar signal bar outside your house on your phone.

The SD-RP1002-D comes as kit, it includes; the booster device, 1 outdoor antenna to receive the weak signal from your chosen network, 1 internal antenna to re-transmit the boosted signal to your designated area (could be a single storey house, single room, basement or attic), cables for connecting the antennas and power supply for the very obvious reason.

So This Is How It Basically Works

1. The outdoor antenna receives the weak signal and takes it in through a coaxial cable to the booster device.
2. The booster device will do its thing, filters the boosted signal and put it some interference control magic. By the way, SD-RP1002-D in technical terms, should be called a 4G LTE mobile phone signal repeater, instead of a booster.
3. The clean signal now is re-transmitted via the indoor antenna, to the target area. The signal can reach an area of up to 4-rooms.

How To Install The SD-RP1002-D Signal Booster Kit

To install the SD-RP1002-D booster kit, follow the simple steps below.

Note: The unit used in the video demo is not the actual SD-RP1002-D model.

Step-by-Step Installation

1. Install the outdoor antenna in a place where you know you have reasonable signal, like your roof or mast.
2. Run the cable down to the booster device and connect it. A 12 meter cable length should be the maximum for optimal performance.
3. Plug in the power to the booster device.
4. That’s it!

There are smartphone apps available that you can use to exactly point your receiver antenna to the nearest network operator's mast.

We recommend the OpenSignal app for both iPhone and Android.