Adapter2 - 3G.IN4.R1 (3G Adapter)

Product ID
5999881193695

Package size
170x120x35 mm

Package weight
0.30 kg

The adapter enables installing an alarm system where no landline is available, but reporting to a monitoring station is required. A general emergency signaling device for elderly people and people in need of nursing, activated by simply picking up the receiver of the connected landline phone device.

Main Features:

• 2G/3G communication
• Phone line emulator
• Programmable through USB and IP
• TEX, TELLMon, SIA IP protocol support
• 4 configurable NO/NC inputs
• 1 NO relay output controllable by events
• Reporting to up to 4 monitoring stations at the same time
• 4 user phone numbers for sending SMS notifications
• Notification through SMS about events (even by partition or zone)
• Firmware update through USB and IP
• Configurable Contact ID codes for each input and service event
• Detailed event log
• Transparent serial port support

Application area:

• The adapter enables installing alarm system where no landline is available but reporting to a monitoring station is required.
• A general emergency signaling device for elderly people, and for those who need medical attendance by using the connectable landline phone device.

Technical specification

• Transmission channel
  3G / 2G / GSM
• Frequency band
  900/2100 MHz @UMTS, 900/1800 @GSM/GPRS
• Operating temperature
  -20 ºC - +70 ºC
• Supply voltage
  12-24 VDC
• Current consumption (maximum)
  500 mA @ 12 VDC
• Current consumption (nominal)
  120 mA @ 12 VDC
• Casing
  Plastic
• Terminal connector design
  Connectable
• Dimensions
  84x72x32 mm
• Weight
  200 g

Inputs

• Contact inputs
  4
• Configurable inputs (NO/NC)
  Yes
• Adjustable input sensitivity
  Yes

Outputs

• Relay outputs
  1
• Output activation on GSM fault
  Yes

Notifications

• GSM voice call
  Yes
• SMS sending
  Yes
• IP-based reporting to CMS
  Yes
• DTMF-based reporting to CMS
  Yes

Supported protocols

• SIA IP DC-09 protocol
  Yes
• SIA DC-05 (DTMF) protocol
  Yes
• TELLMon protocol
  Yes
• TEX protocol
  Yes

Programming

• Programming method
  USB / IP
• Programming software
  Yes

Users

• User phone numbers for forwarding incoming SMS messages
  1
• User phone numbers for reporting
  4

Remote monitoring

• Monitoring station IP addresses
  4
• Individual reporting to monitoring station
  Yes

Other functions

• Configurable internal Contact ID event codes
  Yes
• Automatic dialing (emergency call)
  Yes
• Contact ID event code filtering
  Yes
• Event logs / number of stored events
  Yes / 1000
• Individual SMS sending to user phone numbers with predefinable message
  Yes
• Generates SMS from Contact ID event codes and sends to user phone numbers
  Yes
• Phone line emulation
  Yes
• NTP server support
  Yes
• Transparent serial port support
  Yes
• Adaptation of alarm control panels to mobile network
  Yes